Cloud Electronics VMA120 Mixer Amplifier

Cloud Electronics VMA120 Mixer AmplifierThe Cloud VMA120 is an cost effective mixer amplifiers for use in all types of commercial premises. It has been designed to be as simple to install and operate as possible, but offers a useful range of features and configuration options. The units are mono power amplifiers combined with a simple mixer stage. The output may be used to drive either low impedance loudspeakers directly (4 ohms minimum) or 25 70 100 V line loudspeaker distribution systems.

The Cloud VMA120 is an cost-effective mixer-amplifiers for use in all types of commercial premises. It has been designed to be as simple to install and operate as possible, but offers a useful range of features and configuration options. The units are mono power amplifiers combined with a simple mixer stage. The output may be used to drive either low-impedance loudspeakers directly (4 ohms minimum) or 25/70/100 V-line loudspeaker distribution systems.

Specifications

• Power output: 120 W/channel 
  
• Outputs suitable for either low-impedance (min. 4 ohm) or 25/70/100 V-line systems
  
• Four stereo unbalanced line inputs (3 x RCA jack pairs, 1 x 3.5 mm TRS jack on front panel)
  
• Rear panel line inputs have individual gain controls
  
• Two balanced mic inputs (1 x multipin connector, 1 x ¼” TRS jack), with individual preset gain controls
  
• Front panel controls for mic and music levels, line input selection, mic EQ, master level and EQ
  
• Mic input mute switches on front panel
  
• Line 1 priority, enabled by front panel switch
  
• Mic-over-music priority, enabled by front panel switch
  
• 15 V phantom power available at either mic input 
  
• 100 Hz high-pass filter on each mic input 
  
• 70 Hz high-pass filter in output stage, for use with 25/70/100 V-line systems
  
• Fixed limiter – prevents clipping
  
• Front panel LED bargraph – indicates output signal level
  
• Over-temperature and output DC protection
  
• 230 V or 115 V operation
  
• Forced-air cooling