Bilstein 5100 Lift Shocks Kit for 99-10 Chevy Silverado 1500HD/2500/3500 2WD/4WD, 2-2.5" Front
SKU: 10138997615

Bilstein 5100 Lift Shocks Kit for 99-10 Chevy Silverado 1500HD/2500/3500 2WD/4WD, 2-2.5" Front

$201.71 $224.12
Save 10%
No.2 Bestseller on airmaxductcleaning.net >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Bilstein 5100 Lift Shocks Kit for 99-10 Chevy Silverado 1500HD/2500/3500 2WD/4WD, 2-2.5" FrontThe Bilstein 5100 Series Monotube Shock Absorbers are designed for lifted pickups, SUVs, and Jeeps, providing superior performance and stability. This complete set includes 2 front shocks and 2 rear shocks, making it an ideal choice for enhancing your vehicle's suspension system. Constructed from high quality metal, these shock absorbers are built to withstand rigorous driving conditions while delivering exceptional performance. The Bilstein 5100

The Bilstein 5100 Series Monotube Shock Absorbers are designed for lifted pickups, SUVs, and Jeeps, providing superior performance and stability. This complete set includes 2 front shocks and 2 rear shocks, making it an ideal choice for enhancing your vehicle's suspension system.

Constructed from high-quality metal, these shock absorbers are built to withstand rigorous driving conditions while delivering exceptional performance. The Bilstein 5100 Series is engineered for vehicles with a lift, offering improved handling and ride quality. The front shocks provide a height lift of 2-2.5 inches, while the rear shocks accommodate a lift of up to 1 inch. This combination ensures a balanced stance and enhanced off-road capability. The shocks feature a monotube design, which allows for efficient heat dissipation, resulting in consistent performance during both on-road and off-road driving.

Key Features:
  • Complete set includes 2 front and 2 rear Bilstein 5100 Series shocks.
  • Front height lift of 2-2.5 inches; rear height lift of 0-1 inch.
  • Designed for lifted pickups, SUVs, and Jeeps, enhancing stability.
  • Constructed from durable metal for long-lasting performance.
  • Monotube design allows for effective heat dissipation and consistent performance.
  • Compatible with various models, including Chevy Silverado and GMC Sierra.
  • Old part numbers: F4-BE5-D146-H1 (fronts) and F4-BE5-D147-H0 (rears).

The Bilstein 5100 Series Monotube Shock Absorbers are a perfect upgrade for truck and SUV enthusiasts seeking improved handling and comfort. Whether you are navigating rugged terrain or cruising on highways, these shocks will enhance your driving experience. Ideal for those who require reliable suspension components that can handle both on-road and off-road conditions, this shock absorber set is a smart investment for maintaining and elevating your vehicle's performance.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 10138997615

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 2078 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Mike
Bozeman, US
★★★★★ 5
I love it!!
Style: Dual Arms, Size: 17"-33"
I love this product. I do a lot of gaming and you tube watching. At the same time a lot. With this I keep my desktop clear so I can have my notebooks there and can still have both my monitors up and running. Another plus is if I decide to sit on the couch and play the console I can turn the screen a full 180 degrees so I can setup you tube and play games on the T.V. using the console. The product itself feels to be of decent quality. It is not all plastic. The clamp is nice and strong.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
E
Verified Purchase
Ezra
Lake Worth, US
★★★★★ 3
Gets the job done. Just barely.
Style: Dual Arms, Size: 17"-33"
It holds up my monitor, but just barely, and without any confidence or finesse. I had to move on from my previous arm mounts, the HUANUO. Those claimed to hold up to a 30 inch monitor and support 20 pounds. When I upgraded to a Samsung Odyssey Neo G8, it could no longer perform its duties. The gas shock was up to task, but the final adjustment piece that tilts it up or down was a hard down. Queue this piece of hardware! 22 pounds is more than 20, and 32 is more than 30. This time I'm not even technically out of spec. The clamping force seems more than adequate to hold this to my desk. I will, at this point, basically walk you through how I feel about this mount, based on the order of installation instructions. The way it goes together means that you will have to pull your desk out to maneuver the clamp in place before snugging it back up to the wall, a point in the HUANO's favor since it had a clever leveraging mechanism that lets you hang it with your desk still against the wall. The way cords route through the arms close to the base means that you have to route them before you put the swivel arm on the base. This is because it has a screw at the front and back to secure the cover, and the angle/height are such that you cannot fit a screwdriver into the bottom one after you mount it. While not impossible to do with it installed, it would involve a right-angle screwdriver. They provide one of those, but the screwdriver bit of it is on the long shaft, and you would need it on the short shaft to get to that screw. The way the swivel arms mount on the base is less than ideal as well. The arm slips onto a robust metal hub, and you tighten a screw that pushes against a plastic tab that makes it harder or easier to move. The location for this screw faces the wall. So you must turn the arm at an extreme angle to make it tighter or looser. Not a big deal, but noticeable. Top arms go on smoothly, cable routing is simple and easy. No complaints about this section. Mounting the monitor. The instructions are to mount the plate to the monitor, and then slide the plate onto the holder and secure it with the screw. I did this for neither of my monitors, although I tried it for my second. My big monitor went smoothly by mounting the bracket ahead of time and just forcing the arm down into position while my monitor rested on my desk. I tried this for my second bracket, but it was much harder to do with the monitor in a vertical orientation. So then I tried to do it the way the instructions wanted. I would have been able to do so, but my monitor has the mounting location set into the back of the monitor. This means that you can't mount it flush and then slide it on because you don't have clearance. So I tried to use the spacers. The spacers aren't spacious enough and the screws bottomed before snugging. While I'm not saying that solution wouldn't have technically worked, I instead reverted back to mounting the bracket first. This time I laid my monitor flat on the desk, reduced the tension in the shock greatly, and placed it into position that way. At the end when it's complete and setup? It works. It will hold the G8. But just barely. The G8 uses an adapter to go from the monitor mounting points to VESA 100. This adapter sticks out quite a bit from the monitor, which means the weight is further away from the mounting point. Getting the tilt adjustment to hold involved a bigger allen wrench and cranking it further than it seems like it was meant to go. It groaned, but it held. It wants to dip if you mess with it, so I crank it again. Will it one day totally fail on me and point my monitor at my desk? Maybe. But it works on day 1, so that's a start.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 29, 2024
N
Verified Purchase
Nikki05
Waukegan, US
★★★★★ 5
Holds Backpack Straps Together
Size: 6inches-60PCS
Good quantity for its price. It’s a good quality and durable. I use it to hold my Loungefly backpack straps that I hang on my wall and it does its job perfectly. It’s reusable too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
R
Verified Purchase
Raniel Nebrida
Los Angeles, US
★★★★★ 5
Perfect for small normal cables lying around.
Size: 6inches-200PCS
Cable ties to organize my random cable is what I needed in my life. The quality is solid and it's easy to use and adjust. They hold well without slipping and the size is perfect for use with normal cables. its about 6 inches long so its gives you a little less than 3inch radius considering they way it is suppose to loop. I think realistically, its more like 2 inch radius. It is versatile and can be reused considering its velcro.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
C
Verified Purchase
CJKA
Cuba, US
★★★★★ 5
Perfect Velcro Cable Ties for Everyday Use!
Size: 6inches-60PCS
Great value for good quality Velcro cable ties! These are perfect for your electronic organizer bag or just to organize random loose cables around the house. Hard to tell how long they'll last, but for the price, they are easily replaceable. Highly recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026

recommand products

DURATOOL D00149 Needle File Set 10 Piece
440.08
PANASONIC ELECTRONIC COMPONENTS 6SVP470M Capacitor, 470 �F, 6.3 V, OS-CON SVP Series, Radial Can - SMD, 0.015 ohm, 2000 hours @ 105�C
150.50
Handmade Papier Mache Decorative Hangings Set - Red and Black Elephants - Set of 3
749.50
WURTH ELEKTRONIK 74439358100 Surface Mount Power Inductor, WE-XHMI Series, 10 �H, 5.8 A, 13 A, Shielded, 0.02 ohm
340.63
RUKO 201130 Twist Drill Bit, HSS, 13mm, 101mm Effective, 151mm Overall
450.97