
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 8 - Jul 13
For Your Every Summer RSVP, with Code: SUMMER15
Description
RGB LED Panel 64x64 pixels 2mm pitch 128x128mm (Discontinued)We are not carrying the LED Panels any more. LED Panel displays are a perfect target for your FPGA project using the iCEBreaker or another FPGA development board. Together with the Pmod LED Panel HUB75E driver board it can connect your LED Panel to your FPGA or even a Raspberry Pi or microcontroller. The panels can be chained together using ribbon cables going from one panel to the next. The maximum shift register clock rate of these panels is 30MHz
We are not carrying the LED Panels any more.
LED Panel displays are a perfect target for your FPGA project using the iCEBreaker or another FPGA development board. Together with the Pmod LED Panel HUB75E driver board it can connect your LED Panel to your FPGA or even a Raspberry Pi or microcontroller.
The panels can be chained together using ribbon cables going from one panel to the next. The maximum shift register clock rate of these panels is 30MHz so the longer the chain the longer it takes to refresh the screen.
We've collected some information about LED Panels in a Gist.
The specification of the panels is the following:
- P2 -> 2mm pitch
- 64x64 resolution
- 1/32 scanning (means you need 5 address lines)
- 128mm x 128mm overall panel size
- HUB75E signal connector, this means it has one additional address line compared to the more common HUB75 connector
- The panels come with one HUB75E ribbon cable and one power cable
- You will need to provide 5V @ 4A peak to the display
You can get them in two variants, with the ICN2037 or FM6126 shift register. The ICN2037 shift register is very simple, does not require any configuration but it also has no built in color balance capabilities. The FM6126 requires an initialization sequence on power up to configure it correctly, before it can be used. This initialization sequence is implemented and documented in Bob Miller's icebreaker-candy FPGA designs. There is also a very exhaustive thread about the initialization sequence on the Henner Zeller RPi RGB LED Matrix project page. If you create designs that are FM6126 compatible let us know and we are happy to list them here.
The ICN2037 variant of the panels is compatible with the the Bob Miller's LED Cube project. They have the parts on the back of the panel in the correct positions to fit the led cube frame. If you buy different panels than the ICN2037 offered here you will likely have to either cut or modify the cube brackets.
If you have additional questions join the 1BitSquared Chat or our iCEBreaker forum and ask away! :)
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy